Custom Search

Thursday, August 26, 2010

Signal Tracer and Injector

Description
A simple test circuit to fault find audio and radio equipment. Can be used to inject a square wave signal, rich in harmonics, or used with headphones as an audio tracer.

signal tracer


Notes
A single pole double throw sitch is used to switch between inject and trace modes. The diagram is drawn in trace mode, the earpiece being connected to the collector of the last transistor. Both transistors are wired as emitter followers, providing high gain. DC blocking is provided by the 1n capacitor at the probe end, and the two stages are capacitively coupled.

when the switch is thrown the opposite way (to the blue dot) both transistors are wired as an astable square wave generator. This provides enough harmonics from audio up to several hundred kilohertz and is useful for testing AM radio Receivers.

The Circuit on Veroboard
Below is the actual signal generator built on Veroboard by one of Circuit Exchange International viewers from Holland. Special thanks to Henry for his pictures.



Output Injector Waveform
Henry has also kindly provided on oscillogram on the injector in action, this is shown below.



The fast switch on time of the transistors produces the switching spike which is rich in harmonics.

No comments:

Post a Comment

saran dan coment teman teman sangat membantu pertumbuhan blog ini,terimakasih

My Headlines

Laman